Sunlite Science and Technology

Pioneering LED Illumination
It is currently May 27th, 2023, 7:59 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: LED head Questions
PostPosted: June 15th, 2012, 11:16 am 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Questions on LED heads are listed below


Top
 Profile  
 
 Post subject: LED heads beam shots
PostPosted: June 22nd, 2012, 1:58 pm 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Question
HI, I was wondering if I was to order the Turbo head for my Eagle would it be brighter with the same beam as the Eagle? I ordered the red tool light that was 200lumens but I didn't like how it spread the beam out. I need the Eagle base because it has the magnetic end cap and flexible lead. Do you have any suggestions? I just placed an order for the headlamp with the detachable lead. could you make sure the leads do screw in all the way into the Eagle base before shipping?

Answer
Yes, it you use Turbo Head (220 lm) on your Eagle power unit, it is brighter than if you use the Eagle Head (160 lm). Turbo has a much bigger center beam than Eagle. The beam shots are:


Top
 Profile  
 
 Post subject: Eagle LED head Warranty
PostPosted: June 22nd, 2012, 2:00 pm 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Question
I have an eagle flashlight that just quit, I know its not the battery as I switched battery from another flashlight that I have. Do I need a bulb

Answer
I could be switch, but if it is the LED, we will replace without charge if the LED chip itself is intact. If you had never opened the lens ring,
It should be covered by our warranty. If the LED chip was damaged, we cannot repair, we can exchange with a new one for $15.


Top
 Profile  
 
 Post subject: Color LED head
PostPosted: June 22nd, 2012, 2:52 pm 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Question
Hello, Could you please tell me how many lumens your red and amber LED's are? I am looking for a weapons mountable predator light with some throw. Could you tell me if yours would fill that bill for me and if so what package would I pick. Thank you....

Answer
If you looking for the best throw, I would recommend the 12WFP(rechargeable or CR123 powered), or 8WFP (only available for CR123 powered). Both are weapon mountable (we have 1" standard rail mount that will work with them). The center beam is very concentrated, 2 degree for 8WFP, 3 degree for 12WFP.

As for the lumens,
Red> Slim: 30 lumens, Turbo: 50 lumens, 8WFP: 50 lumens, 12WFP: 90 lumens
Yellow> Slim: 30 lumen, 8WFP: 50 lumens, 12WFP: 90 lumens

Please also note that Red and Amber Slim LEDs and 8WFP LEDs will not working with rechargeable power unit.


Top
 Profile  
 
 Post subject: Green LED head
PostPosted: June 22nd, 2012, 3:17 pm 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Question
I have an eagle 8wfp light and I was wondering if you have a green led head assembly available for my light. I was wanting a green light for hog hunting and would like to be able to switch the heads so i can use my light at work and for hunting.

Answer
We have green LED head in Turbo or 8W Style.

8W: http://powerledlighting.com/shop/index.php?main_page=product_info&cPath=27&products_id=39
Turbo: http://powerledlighting.com/shop/index.php?main_page=product_info&cPath=27&products_id=41


Top
 Profile  
 
 Post subject: 16WFP LED head
PostPosted: August 8th, 2012, 3:17 pm 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Question
I have a question about SNLWT16W53 LED head. I can't find any info about color of the light. I owe one of those already with yellowish color and looking for COOL WHITE color one. Can You tell me what color those 16W53 are? Since there is no option to choose anymore on Your website.

Answer
By default, SNLWT16W53 will be cool white. you can call 785-8328818 if you want to have warm yellowish color.


Top
 Profile  
 
 Post subject: Re: LED head Questions
PostPosted: November 22nd, 2012, 1:54 am 
Offline
Newb

Joined: November 22nd, 2012, 1:51 am
Posts: 1
I am looking for a weapons mountable predator light with some throw. Could you tell me if yours would fill that bill for me and if so what package would I pick? I've been looking at volun lights but they seem cheap.


Last edited by TadSibrel on November 22nd, 2012, 9:53 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: LED head Questions
PostPosted: November 22nd, 2012, 11:56 am 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
This link is to the weapon light, http://powerledlighting.com/shop/index.php?main_page=product_info&cPath=11&products_id=188, this is a far projection light, it can throw over 800 feet. We ungraded the LED in Sept., the current lumen is 330 lumens.

if you don't need pressure switch, or lock out side switch, you can just pick a 8WFP flashlight at http://powerledlighting.com/shop/index.php?main_page=product_info&cPath=11&products_id=8 and add a rail mount at http://powerledlighting.com/shop/index.php?main_page=product_info&products_id=79 to the light.


Top
 Profile  
 
 Post subject: Re: LED head Questions
PostPosted: September 10th, 2013, 4:55 am 
Offline
Newb

Joined: September 10th, 2013, 4:43 am
Posts: 1
I work in a dirty enviroment (mechanic)hands are dirty some times coated with mud/dirt & grease when light is picked up or being used the port for the chager is way to accepteable to being pluged by same or if water enters the port it will rust. :lol: :P

_________________
lsat tutor lsat tutor
sample lsat sample lsat
act classes act classes
mcat classes mcat classes
pcat test pcat test


Top
 Profile  
 
 Post subject: Re: LED head Questions
PostPosted: September 10th, 2013, 9:27 pm 
Offline
Administrator

Joined: February 13th, 2011, 12:32 am
Posts: 82
Question: I work in a dirty enviroment (mechanic)hands are dirty some times coated with mud/dirt & grease when light is picked up or being used the port for the chager is way to accepteable to being pluged by same or if water enters the port it will rust.

Answers: does the charging port still work? you can clean up the rust or dirty, or you can replace a new switch unit (includes the switch and the charging port) for $6, http://powerledlighting.com/shop/index.php?main_page=product_info&cPath=10_51&products_id=108


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
Americanized by Maël Soucaze.